11KW 380V Inverter Pump Controller with Float Switch
Product Description
M1 series is steel three phase LCD display automatic water pump control panel.It is for three phase single pump control.It is used for water supply of urban high-rise buildings and drainage control of basement.It can effectively control and protect centrifugal pumps,submersible pumps,multi-stage pumps,deep well pumps,sewage pump,booster pumps and pipeline pumps.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| General Specification |
| Type |
M1 |
| Model |
M1-4KW |
M1-7.5KW |
M1-11KW |
M1-15KW |
M1-18.5KW |
M1-22KW |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
2.2-15KW |
3-18.5KW |
4-22KW |
| Rated Input Voltage |
380V±10%/50Hz or 60Hz |
| Qty.of Controlled Pump |
Single pump |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
304V-456V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
| Product Size |
400x260x150mm |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3×0.74KW=2.22KW.
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
4kw 3 Phase Water Pump Controller with Dry Run Protection
Product Description
M1 series is steel three phase LCD display automatic water pump control panel.It is for three phase single pump control.It is used for water supply of urban high-rise buildings and drainage control of basement.It can effectively control and protect centrifugal pumps,submersible pumps,multi-stage pumps,deep well pumps,sewage pump,booster pumps and pipeline pumps.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| General Specification |
| Type |
M1 |
| Model |
M1-4KW |
M1-7.5KW |
M1-11KW |
M1-15KW |
M1-18.5KW |
M1-22KW |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
2.2-15KW |
3-18.5KW |
4-22KW |
| Rated Input Voltage |
380V±10%/50Hz or 60Hz |
| Qty.of Controlled Pump |
Single pump |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
304V-456V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
| Product Size |
400x260x150mm |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3×0.74KW=2.22KW.
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
4kw 3 Phase automatic pump controller with Metal box
Product Description
M1 series is steel three phase LCD display automatic water pump control panel.It is for three phase single pump control.It is used for water supply of urban high-rise buildings and drainage control of basement.It can effectively control and protect centrifugal pumps,submersible pumps,multi-stage pumps,deep well pumps,sewage pump,booster pumps and pipeline pumps.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| General Specification |
| Type |
M1 |
| Model |
M1-4KW |
M1-7.5KW |
M1-11KW |
M1-15KW |
M1-18.5KW |
M1-22KW |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
2.2-15KW |
3-18.5KW |
4-22KW |
| Rated Input Voltage |
380V±10%/50Hz or 60Hz |
| Qty.of Controlled Pump |
Single pump |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
304V-456V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
| Product Size |
400x260x150mm |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3×0.74KW=2.22KW.
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
4kw submersible pump control box with Phase failure protection
Product Description
M1 series is steel three phase LCD display automatic water pump control panel.It is for three phase single pump control.It is used for water supply of urban high-rise buildings and drainage control of basement.It can effectively control and protect centrifugal pumps,submersible pumps,multi-stage pumps,deep well pumps,sewage pump,booster pumps and pipeline pumps.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| General Specification |
| Type |
M1 |
| Model |
M1-4KW |
M1-7.5KW |
M1-11KW |
M1-15KW |
M1-18.5KW |
M1-22KW |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
2.2-15KW |
3-18.5KW |
4-22KW |
| Rated Input Voltage |
380V±10%/50Hz or 60Hz |
| Qty.of Controlled Pump |
Single pump |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
304V-456V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
| Product Size |
400x260x150mm |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3×0.74KW=2.22KW.
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
5.5HP 380V pump pressure controller with float switch
Product Description
M1 series is steel three phase LCD display automatic water pump control panel.It is for three phase single pump control.It is used for water supply of urban high-rise buildings and drainage control of basement.It can effectively control and protect centrifugal pumps,submersible pumps,multi-stage pumps,deep well pumps,sewage pump,booster pumps and pipeline pumps.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| General Specification |
| Type |
M1 |
| Model |
M1-4KW |
M1-7.5KW |
M1-11KW |
M1-15KW |
M1-18.5KW |
M1-22KW |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
2.2-15KW |
3-18.5KW |
4-22KW |
| Rated Input Voltage |
380V±10%/50Hz or 60Hz |
| Qty.of Controlled Pump |
Single pump |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
304V-456V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
| Product Size |
400x260x150mm |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3×0.74KW=2.22KW.
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
Single Phase Dual Pump Cooling Tower Water Pump Control Panel
