single phase pressure control farm water pump controller
A2 series rainproof dual pump control panel , with stainless steel case ,LCD display ,mainly used in water pumps ,motors and motor equiped devices.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type |
A2-220V |
| Model |
A2-4KW-220V |
A2-7.5KW-220V |
A2-11KW-220V |
A2-15KW-220V |
A2-18.5KW-220V |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
2.2-15KW |
3-18.5KW |
| Rated Input Voltage |
220V+10%/50Hz or 60Hz |
| Qty.of Controlled Pumps |
Dual pumps |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
176V-264V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
| Product Size |
400x300x190mm |
| Package |
Box size:41.5x34x23cm
Carton size:71×49.5x43cm
PCS/CTN:4 |
1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3PH=3×0.74KW/PH=2.22KW.
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the ordes according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
1 phase double pump 11kw garden water pump controller
1 phase double pump solar farm water pump controller
Product Description
A2-220V series LCD single phase dual water pump control box is used to control and protect water pumps,motors and motor equipped devices,and its rated powers range from 0.75KW to 18.5KW.The control mode is one to two which one controller is used to control double pumps.The box is made of stainless steel which provides robust protection and is rainproof ,good for both indoor and outdoor uses,especially for outdoors uses.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| General Specification |
| Type |
A2-220V |
| Model |
A2-4KW-220V |
A2-7.5KW-220V |
A2-11KW-220V |
A2-15KW-220V |
A2-18.5KW-220V |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
2.2-15KW |
3-18.5KW |
| Rated Input Voltage |
220V+10%/50Hz or 60Hz |
| Qty.of Controlled Pumps |
Dual pumps |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
176V-264V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
| Product Size |
400x300x190mm |
| Package |
Box size:41.5x34x23cm
Carton size:71×49.5x43cm
PCS/CTN:4 |
1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3PH=3×0.74KW/PH=2.22KW.
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the ordes according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
1 phase dual pump intelligent ship water pump controller
Product Description
A2-220V single phase duplex water pump control panel has many operation modes by adopting different electric installations.An important feature that makes the difference between model A2 and common ON/OFF pump control box is the probe/sensor free in the well.Our special design makes it a very reliable and sensitive protection against pump dry out without installation probe/sensor in the well.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| General Specification |
| Type |
A2-220V |
| Model |
A2-4KW-220V |
A2-7.5KW-220V |
A2-11KW-220V |
A2-15KW-220V |
A2-18.5KW-220V |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
2.2-15KW |
3-18.5KW |
| Rated Input Voltage |
220V+10%/50Hz or 60Hz |
| Qty.of Controlled Pumps |
Dual pumps |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
176V-264V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
| Product Size |
400x300x190mm |
| Package |
Box size:41.5x34x23cm
Carton size:71×49.5x43cm
PCS/CTN:4 |
1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3PH=3×0.74KW/PH=2.22KW.
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the ordes according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
220 volt automation home water pump controller
A2 series rainproof water pump controller is useful in all cases we need to control and protect singple phase duplex pumps, managing its turn-on and turn off by different electric installations.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type |
A2-220V |
| Model |
A2-4KW-220V |
A2-7.5KW-220V |
A2-11KW-220V |
A2-15KW-220V |
A2-18.5KW-220V |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
2.2-15KW |
3-18.5KW |
| Rated Input Voltage |
220+10%/50Hz or 60Hz |
| Qty.of Controlled Pumps |
Dual pumps |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
176V-264V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
| Product Size |
400x300x190mm |
| Package |
Box size:41.5x34x23cm
Carton size:71×49.5x43cm
PCS/CTN:4 |
1),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.
2),What’s your main market?
Asia/Europe/Middle East/North and south America/Africa etc.
3),How is the payment?
T/T L/C
4kW Pressure Booster Dual Pump Controller for Industrial Plants
A2-220V series outdoor rainproof stainless steel controller is for dual pump control system,for reliable control of two pumps in residential or commercial installations up to 18.5kw.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type |
A2-220V |
| Model |
A2-4KW-220V |
A2-7.5KW-220V |
A2-11KW-220V |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
| Rated Input Voltage |
220V±10%/50Hz or 60Hz |
| Qty.of Controlled Pumps |
Dual pumps |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
176V-264V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation ( Double Pump Alternate )
Automatic restart after power recovery |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
| Product Size |
400x300x190mm |
| Package |
Box size:41.5x34x23cm
Carton size:71×49.5x43cm
PCS/CTN:4 |
1),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.
2),What’s your main market?
Asia/Europe/Middle East/North and south America/Africa etc.
3),How is the payment?
T/T L/C
Dry Run Protection Water Level & Pressure Pump Controller
A2 series outdoor rainproof stainless steel water pump control box is useful in all cases we need to control and protect 1-phase duplex pumps, managing its turn-on and turn off by different electric installations.It can be of water level control with float switch and level probes,and pressure control with electric contact pressure gauge and pressure switch.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type |
A2-220V |
| Model |
A2-4KW-220V |
A2-7.5KW-220V |
A2-11KW-220V |
| Rated Power |
0.75-4KW |
1.1-7.5KW |
1.1-11KW |
| Rated Input Voltage |
220+10%/50Hz or 60Hz |
| Qty.of Controlled Pumps |
Dual pumps |
| Display |
LCD display |
| Signal Transmission Mode |
Level float switch
Level probe
Pressure switch
Electric contact pressure gauge |
| Water Level Indication |
High/Middle/Low |
| Max.Control Distance |
≤2000m without strong electric and electromagnetic fields |
| Over/under-voltage Range |
176V-264V(adjustable) |
| Protections |
Pump stalled protection
Dry run protection
Over-load protection
Under-voltage protection
Over-voltage protection
Open phase protection
Short circuit protection |
| Main Functions |
Time setting
Fault detection
Anti-rust inspection
Dual pump rotation
Automatic restart after power recovery |
Working temperature
Working humidity
Install position |
-25ºC– +55ºC
20%–90%RH, no drips concreted
Wall mounting |
| Product Size |
400x300x190mm |
| Package |
Box size:41.5x34x23cm
Carton size:71×49.5x43cm
PCS/CTN:4 |
1),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.
2),What’s your main market?
Asia/Europe/Middle East/North and south America/Africa etc.
3),How is the payment?
T/T L/C
