20Y series single phase water control box  is for single pump control.It can effectively control and protect centrifugal pumps,submersible pumps,multi-stage pumps,deep well pumps,drainage pumps,booster pumps,pipeline pumps,and etc.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	20Y
Model	20Y-2.2KW	20Y-3KW
Rated Power	0.37-2.2KW	0.37-3KW
Rated Input Voltage	220V/110V@50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LCD display
Signal Transmission Mode	Level float switch                                                                                                          Level probe                                                                           Pressure switch                                                                     Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	176V-264V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP22 Wall mounting
Product Size	210*139*65mm
Package	Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16

1)How does your factory do the quality control?
Our production process follow up the ISO standard and we control the product quality from the raw materials to the finished product,each of our control panel will be fully assembled and strictly tested before packing and shipping.

2),What is the approximate life time for your control panel?
The designed life time of control panel is 8 years.

 

20S series water pump controller is useful in all cases we need to control and protect single phase single pump, managing its turn-on and turn off by different electric installations.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	20S
Model	20S-2.2KW
Rated Power	0.37-2.2KW
Rated Input Voltage	220V/110V @50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LED display
Signal Transmission Mode	Level float switch                                                                                                          Level probe                                                                           Pressure switch                                                                     Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	176V-264V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP22 Wall mounting
Product Size	210*139*65mm
Package	Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16

Specifications of water pump controller

1)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

2)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

Typical application scenarios:

20S series single phase pump control box , with plastic case ,LED display ,mainly used in water pumps ,motors and motor equiped devices.

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	20S
Model	20S-2.2KW
Rated Power	0.37-2.2KW
Rated Input Voltage	220V/110V @50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LED display
Signal Transmission Mode	Level float switch      Level probe                                                                           Pressure switch                                                                     Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	176V-264V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP22 Wall mounting
Product Size	210*139*65mm
Package	Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16

1)How to convert HP into KW ?

The conversion formula as :1HP=0.74KW
for example: 3PH=3×0.74KW/PH=2.22KW.

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM  ?
Yes,we can make the ordes according to your detailed request.

5)What is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders

20S singple phase LED digital display single pump control panel, mainly used for water pump control and protection for urban high-rise building water supply ,basement drainage,rural farmland irrigtation and deep well pumping. 

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	20S
Model	20S-2.2KW
Rated Power	0.37-2.2KW
Rated Input Voltage	220V/110V @50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LED display
Signal Transmission Mode	Level float switch                                                                                                          Level probe                                                                           Pressure switch                                                                     Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	176V-264V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP22 Wall mounting
Product Size	210*139*65mm
Package	Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16

1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3PH=3×0.74KW/PH=2.22KW.

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM  ?
Yes,we can make the ordes according to your detailed request.

5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders

20Y series single phase pump control panel , with plastic case ,LCD display ,mainly used in water pumps ,motors and motor equiped devices.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	20Y
Model	20Y-2.2KW	20Y-3KW
Rated Power	0.37-2.2KW	0.37-3KW
Rated Input Voltage	220V/110V@50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LCD display
Signal Transmission Mode	Level float switch                                                                                                          Level probe                                                                           Pressure switch                                                                     Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	176V-264V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP22 Wall mounting
Product Size	210*139*65mm
Package	Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16

Specifications of water pump controller

1),How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3PH=3×0.74KW/PH=2.22KW.

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

 

Y1 three phase LCD display water pump controller is useful in all cases we need to control and protect single phase single pump, managing its turn-on and turn off by different electric installations.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	Y1
Model	Y1-4KW	Y1-7.5KW	Y1-11KW	Y1-15KW	Y1-18.5KW	Y1-22KW
Rated Power	0.75-4KW	1.1-7.5KW	1.1-11KW	2.2-15KW	3-18.5KW	4-22KW
Rated Input Voltage	220V±10%/50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LCD display
Signal Transmission Mode	Level float switch                                                                                                         Level probe                                                                           Pressure switch                                                                     Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	304V-456V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP54 Wall mounting
Product Size	320x220x125mm
Package	Box size:26.2*17.2*38cm Carton size:54*39.5*55.5cm PCS/CTN:6

1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW

for example: 3HP=3×0.74KW=2.22KW

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM  ?
Yes,we can make the ordes according to your detailed request.

5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders

Y1 three phase LCD display water pump controller is useful in all cases we need to control and protect single phase single pump, managing its turn-on and turn off by different electric installations.

Typical application scenarios:

Specifications of water pump controller

Type	Y1
Model	Y1-4KW	Y1-7.5KW	Y1-11KW	Y1-15KW	Y1-18.5KW	Y1-22KW
Rated Power	0.75-4KW	1.1-7.5KW	1.1-11KW	2.2-15KW	3-18.5KW	4-22KW
Rated Input Voltage	220V±10%/50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LCD display
Signal Transmission Mode	Level float switch                                                                                                         Level probe                                                                           Pressure switch                                                                     Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	304V-456V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP54 Wall mounting
Product Size	320x220x125mm
Package	Box size:26.2*17.2*38cm Carton size:54*39.5*55.5cm PCS/CTN:6

FAQ

1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW

for example: 3HP=3×0.74KW=2.22KW

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM  ?
Yes,we can make the ordes according to your detailed request.

5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders

Y1 three phase LCD display water pump controller is useful in all cases we need to control and protect single phase single pump, managing its turn-on and turn off by different electric installations.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	Y1
Model	Y1-4KW	Y1-7.5KW	Y1-11KW	Y1-15KW	Y1-18.5KW	Y1-22KW
Rated Power	0.75-4KW	1.1-7.5KW	1.1-11KW	2.2-15KW	3-18.5KW	4-22KW
Rated Input Voltage	220V±10%/50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LCD display
Signal Transmission Mode	Level float switch                                                                                                         Level probe                                                                           Pressure switch                                                                     Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	304V-456V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP54 Wall mounting
Product Size	320x220x125mm
Package	Box size:26.2*17.2*38cm Carton size:54*39.5*55.5cm PCS/CTN:6

1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW

for example: 3HP=3×0.74KW=2.22KW

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM  ?
Yes,we can make the ordes according to your detailed request.

5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders

Product Description

Y1-220V ABS control panel is a direct on-line and pump controller used to control and protect various single phase pumping system above 3kw.

Besides automatic and manual start/stop,

it provides various protections against pump motors.

It also allows users read last 10 faults of the pump,help diagnose for pump repair and maintenance.

General Specification
Type	Y1-220V
Model	Y1-4KW-220V	Y1-7.5KW-220V	Y1-11KW-220V	Y1-15KW-220V
Rated Power	0.75-4KW	1.1-7.5KW	1.1-11KW	2.2-15KW
Rated Input Voltage	220+10%/50Hz or 60Hz
Display	LCD display
Signal Transmission Mode	Level float switch                                                                          Level probe                                                                           Pressure switch                                                                    Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	176V-264V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Dual pump rotation Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP22 Wall mounting
Product Size	320x220x125mm
Package	Box size:26.2*17.2*38cm Carton size:54*39.5*55.5cm PCS/CTN:6

RFQ

1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3×0.74KW=2.22KW.

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM  ?
Yes,we can make the orders according to your detailed request.

5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders

20Y single phase LCD display water pump controller adopts the original imported microcomputer single chip technology,which has the advantage of powerful function and simple and convenient installation.The unique non-contact induction technology realizes the shutdown protection when the pump is dry run and short of water without installing a probe in deep wells.Make the pump truly realize full intelligent unmanned management.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	20Y
Model	20Y-2.2KW	20Y-3KW
Rated Power	0.37-2.2KW	0.37-3KW
Rated Input Voltage	220V/110V@50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LCD display
Signal Transmission Mode	Level float switch                                                                                                          Level probe                                                                           Pressure switch                                                                     Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	176V-264V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP22 Wall mounting
Product Size	210*139*65mm
Package	Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16

1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3PH=3×0.74KW/PH=2.22KW.

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM  ?
Yes,we can make the ordes according to your detailed request.

5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders