0.75-11KW Single Phase Submersible Sewage Water Pump Controller

Product Description

The split water pump control panel is designed to be encased to constitute the whole controller set.The intelligent control unit is an easy-to-use programmable control unit used for the control and protection of single booster pumps, deep well pumps and sewage pumps with direct start in the range of 0.75-30KW (1HP-40HP).

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	D1F-220V
Model	D1F-11000-220V	D1F-30000-220V
Rated Power	0.75-11KW	11-30KW
Rated Input Voltage	220V+10%/50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LCD display
Signal Transmission Mode	Level float switch Level probe Pressure switch Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	176V-264V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Product Size	170x120x50mm
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP22 Wall mounting

1),What is the approximate life time for your control panel?
The designed life time of control panel is 8 years.

2),What is your after sales service policy?
According to the ordering quantity ,we will give some free spare parts or controller for maintenance or replacement and we will give technical training.takes 3-5 days for sample orders,and 15-20 days for orders.

3),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.

4),What’s your main market?
Asia/Europe/Middle East/North and south America/Africa etc.

5),How is the payment?
T/T L/C

0.75-30KW Three Phase Automtic Water Pump Control Panel

Product Description

The split water pump control panel is an intelligent and economical system designed for pumps and motors,can be encased to constitute the whole controller set.Pump Control Panel that start and stop pumps and devices that allow operator monitoring and control. Suitable for Surface pump,Sewage Pump,Booster pump,Submersible pumps and etc.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

Type	D1F
Model	D1F-11000	D1F-30000
Rated Power	0.75-11KW	11-30KW
Rated Input Voltage	380+10%/50Hz or 60Hz
Qty.of Controlled Pump	Single pump
Display	LCD display
Signal Transmission Mode	Level float switch Level probe Pressure switch Electric contact pressure gauge
Water Level Indication	High/Middle/Low
Max.Control Distance	≤2000m without strong electric and electromagnetic fields
Over/under-voltage Range	304V-456V(adjustable)
Protections	Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection
Main Functions	Time setting Fault detection Anti-rust inspection Automatic restart after power recovery
Product Size	170x120x50mm
Working temperature Working humidity Degree of protection Install position	-25ºC– +55ºC 20%–90%RH, no drips concreted IP22 Wall mounting

1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3×0.74KW=2.22KW.

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.

5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders