Product Description

The automatic pump controller is an intelligent and economical system designed for dual pumps and motors. It permits automatic pump operation, while also monitoring aspects of the pump to ensure all is running smoothly.Suitable for Centrifugal pump,Surface pump,Sewage Pump,Booster pump,Submersible pump,Multistage pump,Deep Well pump,Pipeline Pump and etc.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3PH=3×0.74KW/PH=2.22KW.

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM  ?
Yes,we can make the ordes according to your detailed request.

5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders

Product Description

The ABS control panel is a direct on-line and pump controller to be used on three phase dual pump control system.It is able to control up to two pumps and balance the load between them by alternating the starts of each pump,two pumps can also be activated at the same time.It also allows users read last 10 faults of the pump,help diagnose for pump repair and maintenance.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

1)How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3×0.74HP=2.22KW.

2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .

3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

4)Can you provide OEM or ODM  ?
Yes,we can make the orders according to your detailed request.

5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders

Y seris LCD display pump controllers are designed for pressure and level control, monitoring and protection of various pumping systems one pumps or two pumps starting direct-on-line. Y seriespump controllers can be used in various type of empty application e.g. waste water transport, drainage or tank filling in water supply.

Specifications of water pump controller

FAQ

1)How does your factory do the quality control?
Our production process follow up the ISO standard and we control the product quality from the raw materials to the finished product,each of our control panel will be fully assembled and strictly tested before packing and shipping.

2),What is the approximate life time for your control panel?
The designed life time of control panel is 8 years.

3),What is your after sales service policy?
According to the ordering quantity ,we will give some free spare parts or controller for maintenance or replacement and we will give technical training.takes 3-5 days for sample orders,and 15-20 days for orders.

Y2 3-phase LCD display pump controller is of high technology for starting, stopping and protecting various pumps and motors. Very important accessories for starting pumps and motors.The control panels are used for both water supply and drainage, and feature a complete pump automation system.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

1)Can you provide OEM or ODM  ?
Yes,we can make the orders according to your detailed request.

2)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders.

3)How does your factory do the quality control?
Our production process follow up the ISO standard and we control the product quality from the raw materials to the finished product,each of our control panel will be fully assembled and strictly tested before packing and shipping.

Winning designs and builds Control Panels for pump control and protection in irrigation systems, sewage, transfer pumping, wastewater lift stations, pump houses, pump chambers, septic tanks, sand filters, pond aerations and fountain control.Y series is the automatic LCD display pump controller with Y1 for single pump and Y2 for twin pumps.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

1)How does your factory do the quality control?
  Our production process follow up the ISO standard and we control the product quality from the raw materials to the finished product,each of our control panel will be fully assembled and strictly tested before packing and shipping.

2),What is the approximate life time for your control panel?
  The designed life time of control panel is 8 years.

3),What is your after sales service policy?
  According to the ordering quantity ,we will give some free spare parts or controller for maintenance or replacement and we will give technical training.takes 3-5 days for sample orders,and 15-20 days for orders.

4),How can I trust you ?
  We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.

5),What’s your main market?
  Asia/Europe/Middle East/North and south America/Africa etc.

6),How is the payment?
  T/T  L/C

ABS plastic pump contron unit is a direct on-line starter and pump controller. It is available for single phase and three phase systems. It can control one or two pumps (depending on the model/options chosen).

This single or twin pump control panel can run in three modes, Boosting, Storage or Sewage.
In Boosting mode, the pump controller works with a pressure boosting system using both pressure transducer,pressure gauge, and pressure switches to monitor and run pumps when a pressure drop is detected.
In Storage mode, the pump controller uses float switches or level probes to monitor the levels in two tanks and therefore functions as a level controller.
In Sewage mode, the pump controller uses float switches or level probes to determine levels inside a tank and pump according to the parameters set by the installer.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

1)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .

2),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.

Y2 is a compact ABS two-pump controller for both empty (pump down) and fill (pump up) applications,

 for use with floast switch,probe,pressure gauge and pressure switch.

This product integrates all basic control functions into one panel,

with set points for two pumps with alternation, 

a fault input for each pump and an operator interface showing pump status at a glance.

Specifications of water pump controller

FAQ

1),How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3*0.74KW=2.2KW.

2),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.

3),What’s your main market?
Asia/Europe/Middle East/North and south America/Africa etc.

4),How is the payment?
T/T  L/C

Y series pump controller is the most complete electrical panel for pumping and drainage systems ever.

Y series is our best-selling electrical panel, because it is suitable for multiple applications for both clean water systems (emptying, filling, pressurization) and dirty water (emptying and draining waste water).

Compact, economical and easy to install and use.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

1),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.

2),What’s your main market?
Asia/Europe/Middle East/North and south America/Africa etc.

3),How is the payment?
T/T  L/C

Y2 is a compact ABS two-pump controller for both empty (pump down) and fill (pump up) applications, for use with floast switch,probe,pressure gauge and pressure switch.

This product integrates all basic control functions into one panel,with set points for two pumps with alternation, a fault input for each pump and an operator interface showing pump status at a glance.

Typical application scenarios:

-Agricultural irrigation/ pumping

-Pressure Booster Systems

-Waste water treatment

-Water Tanks/Wells

-Drainage System

-Cooling Towers

-Flood Control

-Fishing Boat

Specifications of water pump controller

1),How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3*0.74KW=2.2KW.

2),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.

3),What’s your main market?
Asia/Europe/Middle East/North and south America/Africa etc.

4),How is the payment?
T/T  L/C

Y2 is a compact ABS two-pump controller for both empty (pump down) and fill (pump up) applications, 

for use with floast switch,probe,pressure gauge and pressure switch.

This product integrates all basic control functions into one panel,

with set points for two pumps with alternation, 

a fault input for each pump and an operator interface showing pump status at a glance.

Specifications of water pump controller

    FAQ

1),How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3*0.74KW=2.2KW.

2),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.

3),What’s your main market?
Asia/Europe/Middle East/North and south America/Africa etc.

4),How is the payment?
T/T  L/C